USCOM 1A hemodynamic monitor
Non-invasive continuous-wave Doppler system for measuring blood flow, stroke volume and cardiac output.
- Manufacturer
- Uscom
- Group
- Hemodynamics
- Origin
- Australia
Description
Non-invasive Doppler hemodynamic monitoring
USCOM 1A uses transcutaneous continuous-wave Doppler to measure blood flow through the aortic or pulmonary valve. The 2.2 MHz divergent beam transducer supports signal acquisition, while the touchscreen displays live data, stored data and hemodynamic trends.
The system displays 24 hemodynamic parameters. Seven values—CVP, systolic blood pressure, diastolic blood pressure, SpO2, Hb, height and weight—are entered by the user; DO2 and SVS parameters require the OXYCOM option.
Features & benefits
- Non-invasive continuous-wave Doppler with a 2.2 MHz divergent beam transducer
- Measures flow across the aortic valve at the suprasternal notch or across the pulmonary valve at the parasternal border
- Displays waveforms, current values, changes from the last stored measurement and average values
- Stores individual measurements or averages over 3, 7 or 14 seconds
- Trend analysis and reports with Uscom Reporter software
Technical specifications
Test menu / measured parameters
Measures 24 parameters:
- Vpk
- VTI
- HR
- MD
- ET%
- SV
- SVI
- SVV
- CO
- CI
- SVR
- SVRI
- Pmn
- FT
- FTc
- SW
- CPO
- SMII
- PKR
- MAP
- BSA
- OTD
- DO2
- SVS
| Technology | Transcutaneous continuous-wave Doppler |
|---|---|
| Transducer frequency | 2.2 MHz |
| Display | 12.1-inch TFT LCD, 800 × 600 pixels, LED backlight |
|---|---|
| Touchscreen | 5-wire resistive, 4096 × 4096 resolution |
| Height × width × depth | 310 × 350 × 180 mm |
|---|---|
| Weight | 5.4 kg |
| Communication | Ethernet for network printing; USB for local printing and data export via flash drive |
|---|
| Battery | Removable 8700 mAh Li-ion smart battery, more than 2 hours of operation |
|---|---|
| Input power | 100–240 VAC, 65 W; 15 V output |
